READ BEFORE USE:
- Read the entire product manual before use.
- WIMBA products are medical devices available only from authorized partners.
- The orthosis is one of the elements of an individual treatment plan - follow the recommendations of the veterinarian or physiotherapist ordering the use of the orthosis in terms of time, frequency and method of use.
- The orthosis is not intended for 24/7 use.
- Never leave your pet unattended with the orthosis in place.
- We do not recommend using the orthosis on affected skin.
- Prolonged exposure to very low and high temperatures, washing in a washing machine, drying with a dryer, modifying or interfering in any way with the structural integrity of the orthosis is prohibited.
- The dog is a living animal. The process of getting used to wearing medical supplies may be different for each dog. We recommend using positive methods such as desensitization, counter-conditioning and medical training using positive reinforcement.
- If you have any doubts about the use of the product or if the device is damaged, please contact your seller.
- The full terms of the warranty are described in the warranty card included with the product.
Content of the Box
- Assembled orthosis with token set and inserts
- Additional token sets (if ordered)
- Additional items (if ordered*)
* Please refer to the WimbaAPP for order details
Description of the Orthosis Components
The WIMBA Stifle Orthosis G1 Mini consists of:
- the main structure (1),
- three fastening straps: upper (2), middle (3) and lower (4) -
- fastened with a snap - fit system, and clipped in hinged tokens (5).
Modular Parts
Fastening Straps with Fasteners
WIMBA Stifle G1 mini orthosis is equipped with snap-fit fasteners. They allow for easy placement on the animal’s limb as well as a better overall fit.
Tokens
The knee orthosis is equipped with two round tokens - located in the central part of the orthosis hinge. The round tokens are used both to completely stiffen the joint in the selected flexion or extension angle, and to control the range of motion in the joint. Round tokens are clipped into the hinges, according to the labels.
NORMAL ROM 100° (FLEX 55° - EXT 155°)
MILD ROM 70° (FLEX 75° - EXT 145°)
MODERATE ROM 50° (FLEX 50° - EXT 145°)
SEVERE BLOCKER ROM 0° (FLEX 135° - EXT 135°)
Inserts
The whole product is complemented by sponge-like spacer cushions - inserts. These allow the orthosis to be placed securely and comfortably to the animal’s limb.
Orthosis Fittings
Step 1 - Prepare the Paw
Ensure it is clean and dry before applying the orthosis.
Step 2 - Positioning the Orthosis
Unfasten the straps with a snap-fit system by pushing the external button and unlocking the pawl.
Place the brace over the dog’s limb, ensuring it is oriented correctly. The straps should be positioned on the caudal side of the limb, while the main structure should be on the cranial side. The part with the 'W' should align with the cranial aspect of the tibia.
Hinges should be on the medial and lateral sides of the limb.
Step 3 - Fastening the Orthosis
Insert the straps with a snap-fit system into the clip hole.
Fasten the orthosis on a standing dog with the orthotic limb placed on the ground.
Lift the paw and bend it to ensure tokens are directly in line with the joint and there is no friction between the token and joint.
Step 4 - Ensuring Even Tightening
If the strap is fastened on both sides, ensure even tightening to avoid point loading.
Step 5 - Correct Fit
A properly fitted and used orthosis contains the following elements:
- The brace is in the correct position on the animal’s limb, not too high, too low, not rotated internally or externally. tokens are directly in line with joint
- It stays in the correct place during the animal's gait, without twisting or sliding down.
- The brace is not overly tight and does not provoke pressure sores on the dog’s limb.
- No hard elements of the brace (Tokens, Brace frame) contact the animal's limb during any phase of the gait.
Note! It is important to monitor your animal at all times to ensure these principles are followed while wearing the orthosis.
VERY IMPORTANT
If swelling or skin damage appears, remove the orthosis immediately and contact your doctor for better fitting tips.
Recommended Use and Application
- WIMBA orthosis is a medical device and should be used solely at the discretion of a veterinarian or physiotherapist.
- During the first week of use, the orthosis should be worn up to for fifteen minutes while walking, maximum three times a day. Subsequently, increase the wearing time every two days by fifteen minutes. The time frame may vary depending on the case and the dog's behavior. We recommend reading the behavioral guide.
Recommended Wear Schedule
|
DAY |
TIME |
FREQUENCY |
|
1 |
15 Minutes |
Up to 3 times a day |
|
2 |
15 Minutes |
Up to 3 times a day |
|
3 |
30 Minutes |
Up to 3 times a day |
|
4 |
30 Minutes |
Up to 3 times a day |
|
5 |
45 Minutes |
Up to 3 times a day |
VERY IMPORTANT
The veterinarian or physiotherapist should guide the animal throughout the entire course of treatment period. It is recommended that wearing schedules ONLY be modified by the veterinarian or therapist to meet therapeutic goals.
The WIMBA orthosis should never be used for 24 hours a day!
While using the orthosis, the dog must be under constant surveillance of the owner.
Do’s and Don'ts of Your WIMBA Orthosis:
1. DO rinse WIMBA orthosis of any chemicals such as salt water, chlorine, sand, soil and mud after daily activities. When drying, remove any excess water from orthosis to avoid the growth of bacteria and fungi.
2. DO clean and hand dry your orthosis.
3. DO NOT wash orthosis in a washing machine or use a hair dryer to dry orthosis.
4. DO NOT heat or modify the orthosis in any way that could alter the structural integrity of the orthosis.
7. DO NOT allow your pet to bite the orthosis. It is necessary to monitor the dog while using the orthosis and not to leave the dog alone with the orthosis.
8. DO NOT modify the structure of the orthosis.
